Enter the board number in the Transform's Selected Board Number property. Before an MC DAQ device can be used, one has to load it and assign a channel number to it using InstaCal. Tick Period: The Tick Period property only affects the AnalogOut ports. Using a particular channel number here, will select which DAQ device to read / write to. Your new Measurement Computing product comes with a fantastic extra. An instance of a server through which this channel is opened. USB-1408FS relies upon the Microsoft Human Interface Device (HID) class drivers. It sets the rate at which the D to A outputs are updated, on average. Run InstaCal and add your MCC device 6 Run InstaCal and add your MCC device To run InstaCal and add an MCC device to the InstaCal configuration, complete the following steps. The Transform's AnalogIn ports are always updated as rapidly as possible. Our recommendation for this device is to set all digital channels to be either input or output, and avoid changing analog outputs quickly when possible. The MCC DAQ can be configured in InstaCal to behave as either a single-ended or differential DAQ. Note that changing the digital port direction for one port applies to all 8 ports in that port's group. When configured as single-ended, only the lower 4 ports are displayed. To run InstaCal, click on Start Programs Measurement Computing InstaCal. The displayed ports function as configured. If you installed a USB, PCI, and/or PCMCIA device, the Plug and Play Hardware Detection dialog opens.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |